FIG-1
12
GEO:CS1
QUICK START
TRIGGER ADJUSTMENT
D
FIG-1
The
spring return screw
A
controls the spring strength of the trigger
return. Clockwise increases the strength, counter-clockwise decreases it.
The
trigger shoe retaining screw
B
is only to be removed to change to
a new shape
trigger shoe (sold separately). Remove the frame to access
the screw. Counter-clockwise removes the screw, clockwise tightens it.
The
pre-travel screw
C
adjusts the distance the trigger travels before
being pulled. Clockwise reduces the amount of travel (shortening the
trigger), counter-clockwise increases the
trigger pull distance.
The
microswitch screw
D
adjusts the distance between the trigger
and microswitch. Clockwise reduces the distance, counter-clockwise
increases it.
The
magnet adjuster screw
E
adjusts the strength of the trigger return.
Clockwise increases the strength, counter-clockwise reduces it.
The
post-travel screw
F
adjusts the distance the trigger travels once
pulled. Clockwise reduces the amount of travel (shortening the
trigger),
counter-clockwise increases the trigger pull distance.
B
A
+
+
–
–
–
+
–
+
–
+
–
+
C
E
F
HEX
1/16
HEX
1/16
HEX
1/16
HEX
1/16
HEX
1/16
HEX
5/64
WARNING!
Do not wind the screws in too far is this may prevent the CS1 from firing or even
damage the marker. However, if the pre-travel screw is wound in too far this
could cause the CS1 to fire unintentionally.
WARNING
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...