FIG-1
FIG-3
FIG-2
FIG-4
27
GEO:CS1
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - FILTER MENU
The FILTER menu parameters tune the CS1 software filters which prevent the CS1 from firing unless all of
the necessary conditions are met. Factory default settings are suitable for most set-ups however, certain
loader and
trigger set-ups may require more modification.
FIG-2 - DEBOUNCE PARAMETER
This sets the amount of
trigger bounce that may be
present and can be set from level 1 to level 9.
>
LEVEL1: Least filtering (most bounce).
>
LEVEL9: Most filtering (least bounce).
> CANCEL: Editing is cancelled and unchanged.
FIG-3 - EMPTY PARAMETER
This sets the time
delay between the breech sensor (
BS) recognising the breech as EMPTY
(bolt retracted) and the next shot being allowed to fire.
This can be set between 1.0 and 20.0 milliseconds in 0.1 millisecond increments.
FIG-4 - FULL PARAMETER
This sets the delay between the paintball landing in the breech and the marker being allowed to fire.
This parameter can be set between 1.0 and 20.0 milliseconds in 0.1 millisecond increments.
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...