FIG-1
FIG-3
FIG-2
FIG-4
25
GEO:CS1
ELECTRONICS
USER INTERFACE PARAMETERS
FIG-1 - SEMI SHOTS PARAMETER
This sets the number of shots in semi-automatic required at the
KICK IN rate before ramping starts.
This parameter can be set between 3 and 9 pulls in 1 pull increments.
FIG-2 - KICK IN PARAMETER
This sets the maximum
rate at which the user has to pull the trigger to start ramping.
This parameter can be set between 3.3 and 10.0 pulls per second in 0.1 pulls per second increments.
FIG-3 - SUSTAIN PARAMETER
Whilst ramping, this sets the rate at which the user must continue to pull the trigger to maintain ramping.
This parameter can be set between 3.3 and 10.0 pulls per second in 0.1 pulls per second increments.
FIG-4 - RESTART PARAMETER
This defines the amount of time that elapses, after the final ramped shot is fired before ramping will begin
again after 1
trigger pull. If the RESTART time expires, the other ramping conditions must be met.
This parameter can be set between 0.0 and 1.0 seconds in 0.1 second increments.
Summary of Contents for GEO CS1
Page 1: ...01 GEO CS1 PLANET ECLIPSE GEO CS1 USER MANUAL ENGLISH 68 CAL ...
Page 5: ...05 GEO CS1 ...
Page 6: ...FIG 1 06 GEO CS1 QUICK START SETTING UP THE CS1 F C B E D H I K J A G HEX 5 32 1 2 2 5 3 4 6 ...
Page 14: ...FIG 1 14 GEO CS1 QUICK START UNLOADING THE CS1 D G H C A F B E HEX 5 32 2 1 6 5 3 4 ...