Defect detection
: The device does not turn off after short pressing on the
key.
Possible reason
: Firmware failure.
Method of correction
: Press and hold the
key till device turns off.
7. STORAGE
Store your IT-081 under the following conditions: environment temperature from -20
to +40
0
С
, relative humidity up to 90 % (at 30
0
С
).
8. TRANSPORTATION
The IT-081 must be shipped in any closed vehicle at temperature from -20 to +40
0
С
,
relative humidity 90% (at 30
0
С
) and atmospheric pressure of 84 to 106.7 kPa (630 to 800
mm Hg).
Cargo holds, railway cars, containers, and truck beds, utilized for shipment of the IT-
081 should be free from any traces of cement, coal, chemicals, etc. When shipped by air
the products should be kept in aircraft sealed compartments.
9. LABELING
The serial numbers of Base Unit and Removable Module, which contain index
number and date-of-manufacture code, can be found on the bottom panel of the respective
item and also can be viewed on the display in identification data readout program (see
Section 4.5.4).
10. WARRANTY INFORMATION
The manufacturer warrants the IT-081 TV Level Meter to conform to the
specifications of this Manual when used in accordance with the regulations of operation
detailed in this Manual.
The manufacturer will repair or replace without charge, at its option, any IT-081 TV
Level Meter found defective in manufacture within the warranty period, which is twelve (12)
months from the date of purchase. Should the user fail to submit the warranty card
appropriately certified by the seller with its stamp and date of purchase the warranty period
will be determined by the date of manufacture.
The warranty is considered void if:
а
) the defect or damage is caused by improper storage, misuse, neglect, inadequate
maintenance, or accident;
b) the product is tampered with, modified or repaired by an unauthorized party;
c) the product's seals are tampered with;
d) the product has mechanical damage.
The batteries are not included or covered by this warranty.
Transport risks and costs to and from the manufacturer or the authorized service
centers are sustained by the buyer.
The manufacturer is not liable for direct or indirect damage of any kind to people or
goods caused by the use of the product and/or suspension of use due to eventual repairs.
When returning the faulty product please include the accurate details of this product
and clear description of the fault. The manufacturer reserves the right to check the product
in its laboratories to verify the foundation of the claim.
31
