Planar IT-081, Operating Manual

Page: 17 / 31

4.4.2. Channel Plans
4.4.2.1. Channel Plan List
This mode allows performing all the operations with channel plans: viewing, editing,
deleting, and creation of new pages. See the view of the screen in figure 4.10.
The table contains the plan name and the date of its creation or editing. The channel
plan installed in the Meter is marked by sign. The plans in the table are sorted by
name. The top row of the table always contains All channels plan, which corresponds to
the channel allocation standard. If this plan is not installed, the Meter will be operating
without the channel plan.
Figure 4.10
Press F1 to open the pop-up menu with the list of available commands:
1. Edit . Viewing and editing of the selected channel plan;
2. Rename . Editing of the channel plan name;
3. Delete . Deleting of the selected channel plan.
Also you can add a new channel plan by pressing F2/Add , and install the selected
plan by F4/Select .
4.4.2.2. Editing Channel Plan
The screen view of the channel plan table is shown in the figure 4.11:
Figure 4.11
The table contains the channel number, channel name, tuning frequency and
modulation type.
The following commands can be accessed by the functional keys:
1. Edit . Select by F1 . Editing of the selected channel;
2. Add . Select by F2 . Adding of new channel;
3. Delete . Select by F3 . Deleting of the selected channel.
17