The scan limits can be set by frequency or by channel numbers . You can select the
way of scan limit setting by
F3
. You can either select the limits by and
keys, or enter
the required values by alphanumeric keypad. The
Detector
parameter determines the type
of the spectrogram: instantaneous (
Sample
), mean (
Average
), maximum (
Max
) or
minimum (
Min
) spectrum values can be determined.
After tuning of all the parameters is finished, press
F1
. To cancel the page creation,
press
F4
.
Figure 4.20
4.4.6. Memory Manager
4.4.6.1. General Information
The IT-081 is equipped with nonvolatile NVRAM device for the storage of various
data of the Data Logger. The memory can contain different types of files. For IT-081 Meter
these are: channel plan list, limit plan list, channel data log, and spectrum data log.
Different configurations of IT-08 may have other file types located in the memory.
The memory Manager allows viewing the list of file types and the number of files
pertaining to each type, and also formatting the memory (erasing all files).
CAUTION
Perform operations with memory manager with caution. Incorrect actions may
lead to partial or total data loss.
4.4.6.2. Operating Memory Manager
The
icon in the main menu corresponds to the memory manager mode.
See the
view of the memory manager screen in the figure 4.21:
Figure 4.21
The table displays the file types and the number of files of each type.
Press
F1
to delete all the files of the same type, and press
F4
to format (clear) all the
memory.
23
