Figure 4.7
The
Tilt
mode displays the tilt line between two selected channels (markers A and B)
and the difference between their levels. To choose the marker, press
F2/Marker
.
The screen view of
Limit
mode is presented in figure 4.8.
Figure 4.8
The
Limit
mode additionally displays the upper and lower limits of the channel levels.
Upper and lower limits can be edited via pop-up menu that appears after pressing
F2/Limits
key.
4.4. Data Logger Function
4.4.1. General Information
Data Logger is intended for automation of the procedure of recording the
measurement results. There are four data logger directories: Channel Plan List, Limit Plan
List, Channel Data Logger, and Spectrum Data Logger. The data logger memory is
common for all the directories and is of a dynamic type. The memory capacity allows to
save up to 32 channel plans, up to 8 limit plans, up to 130 channel data logger pages (with
maximum number of channels), and up to 130 spectrum data logger pages. The Meter
allows viewing the saved data off-line or by means of a computer. To check the data
logger memory, the IT-081 offers memory manager mode. This mode allows testing, free
resources determination, and formatting of the memory.
To select between the data logger modes, use arrows and functional keys. In the
main menu select the required page with icons by
◄
and
►
, then set the icon of the
required mode at the bottom of the screen by and arrows, and press the
corresponding functional key. The icons correspond to the modes as follows:
Measurement tab
Configuration tab
Ch. test
Sp. test
Ch. plan
Limit plan
Files
16
