Figure 4.18
To create a page, it is necessary to enter its name, select the channel and limit plans,
and select the input attenuator mode.
4.4.5. Spectrum Data Logger
4.4.5.1.
4.4.5.2.
General Information
Spectrum data logger is intended for measuring the signal spectrum in the defined
frequency band and recording the measurement results to the Meter memory with date
and time thereof. Spectrum data logger allows viewing the measurement results and
uploading the data to your PC for further processing and report preparation.
List of Spectrum Data Logger Pages
This mode allows performing all the operations with the spectrum data logger pages:
viewing, deleting and creating of a new page. See the screen views in the figure 4.19.
Figure 4.19
The screens show the list of spectrum data logger pages. For each page the
following information is presented: status, page name, date and time of updating, and
frequency scanning range.
Press
F1
to open the pop-up menu with the list of available commands:
1.
Graph
. Viewing of the selected page.
2.
Delete
. Deleting of the selected page.
Press
F2/Add
to add a new page, press
F3/Run
to start the page scanning
(measurement), and press
F4/Sort
to select the page sorting type (by the date of the last
updating, by status or by the page name) in the table.
The status sign shows the page state:
Grey indicator
Page created, but not scanned;
Green indicator
Page scanned.
4.4.5.3. Creating New Spectrum Data Logger Page
To create a new spectrum data logger page, first press
F2
key. Parameter selection
screen will appear (figure 4.20). It is necessary to enter the page name, the scan limits,
attenuation value, and the type of the saved trace.
22
