Planar DOME Md4/PCV, Installation Manual, Page: 83 / 88

Customizing Sync Parameters on Windows NT | 73
Customizing Sync Parameters on Windows NT
You can customize sync parameters on the Windows NT
operating system.
To customize sync parameters
1. Open the text sync (
.vid
) file from the
C:\dome\tools
directory. The
.vid
file for the Md4/PCV board is
Md4PCV.vid
.
2. Change individual sync parameters in the text sync file
or add new individual syncs at the end of the file to create
a new mode.
3. Save the text sync file.
4. Open a DOS window.
5. Change the directory to
C:\dome\tools.
6. Run the
mdconfig
program from a DOS window
to build the corresponding
.cfg
file.
The program queries you to enter the system
windows directory.
7. Type
C:\winnt
or your corresponding windows directory.
The program queries you to back up the existing
.cfg
file.
If your customized file contains errors, the display may appear
blank. DOME strongly advises that you always make a backup
copy of the original
.vid
and
.cfg
files before making any
changes to them.
Make sure you have no empty lines at the end of the
.vid
file.