Planar DOME Md4/PCV, Installation Manual, Page: 63 / 88

Configuring Display Settings on Windows 2000 | 53
2. Click OK within 15 seconds to accept the new settings.
Ignore the message to revert to the original settings.
The resolution changes on both installed screens, and a
message appears prompting you to accept or cancel the
new resolution.
3. Click OK to set this resolution, or Cancel to return to the
DOME tab.
If you select OK, this message appears.
4. Click OK. You can now use the display.
To set monitor preferences
To enable Pedestal, select Pedestal on the DOME tab. Refer to
your monitor documentation for more information.
To set driver options
To disable DirectDraw, select Disable DirectDraw on the
DOME tab.