Planar DOME Md4/PCV, Installation Manual, Page: 59 / 88

Installing the PCV Windows 2000 Driver | 49
To enable displays and set the display resolution
1. Turn on your computer.
2. Log on as administrator.
3. Right-click the desktop, and select Properties -> Settings.
4. Click the Display list and select Default Monitor on
Md4/PCX, Md4/PCV, or Md5/PCX.
5. Select Advanced -> Adapter -> List All Modes.
6. Highlight the desired resolution, and click OK.
7. Select Apply -> OK from the Default Monitor on
DOME Md4/PCX, Md4/PCV, or Md5/PCX Properties
dialog box.
8. Select Extend my Windows desktop onto this monitor, and
click Apply.
This message may appear:
Windows will now apply your new desktop settings.
The original desktop will be restored if the
settings are not applied correctly.
9. If it does, click OK to accept the new settings, or Cancel to
revert to the original settings.
If you have installed two or more displays, enable them as
described in steps 3–9.