Planar DOME Md4/PCV, Installation Manual, Page: 31 / 88

Configuring Display Settings on Windows NT | 21
5. Click Test.
The Testing Mode dialog box appears with this message:
The new mode will be tested. Your graphics adapter
is set to the new mode temporarily so that you can
determine whether it works properly. Click OK and
then wait 15 seconds.
6. Click OK.
A test bitmap appears.
The Testing Mode dialog box appears, prompting you:
Did you see the test bitmap properly?
7. Click Yes if the test bitmap displayed correctly or
No if it didn’t.
If No, the Testing Mode dialog box appears, prompting you
to try different settings for your display. Click OK. Repeat
steps 3–7 to perform the test with a different resolution.
8. Select Large Fonts in the Font Size field (optional).
9. Click OK.
The display resolution is now set properly for the
Md4/PCV board.
This message appears:
Do you want to restart your computer now?
10. Click No.
Your monitor(s) must be connected to test the resolution
and refresh rate.
Selecting Large Fonts on the Settings tab does not make a
significant difference in font size at very high resolutions.
The DOME driver installs extra-large font options in your
C:\dome\tools
directory. To add those fonts to your
display properties, follow the instructions for “DOME large
fonts” on page 30.