manualshive.com logo in svg

Planar DOME Md4/PCV, Installation Manual, Page: 56 / 88

Share
Download
Planar DOME Md4/PCV Installation Manual Download Page 56

46 | Installing the Board and Driver

To install the driver for an additional board

1.

Turn off the power to your computer.

2. Install the board, and follow the installation steps on 

pages 41–43.

3. Turn on your computer, select VGA mode, and log on as 

administrator.

The Windows 2000 operating system recognizes the new 
hardware device. The Digital Signature Not Found dialog 
box appears. 

4. Click Yes.

5. Insert the WINDRIVER CD, and click Browse… to open the 

win2k\MdXPCX\mdxpcx 5.0.

x.yyy d

irectory (where

 

x.yyy 

denotes secondary version numbers). 

6. Click Open.

The Files Needed dialog box appears.

7. Click OK.

If you leave the computer turned on, you could suffer 
electric shock or cause damage to both the computer 
components and the Md4/PCV board.

Make sure VGA is disabled on additional Md4/PCV boards 
you install.

If you’ve installed a...  Then...

The next step is to...

Single-headed board

The installation is 
complete.

Enable your display 
and set the resolution. 
(See page 49.)

Dual-headed board

The installation is 
not complete.

Modify your display 
configuration. (See 
page 47.)

Summary of Contents for DOME Md4/PCV

























































































Reviews:

No comments