Planar DOME Md4/PCV, Installation Manual, Page: 24 / 88

14 | Installing the Board and Driver
To install multiple boards
Repeat the installation instructions that start on page 11 for
each board.
Remember these tips when installing multiple boards:
• The Windows NT driver version 4.4.0 supports up
to 8 Md4/PCV boards (16 screens).
• Each board requires less than 5 amps of +5V.
• You can install as many Md4/PCV boards as your
system’s power supply and available PCI slots can
support. (Windows 2000 only).
• You cannot mix DOME board types; additional boards must
be Md4/PCV boards (Windows NT only).
• You must disable VGA mode on all but one Md4/PCV board
if multiple boards are in use. (See page 10.)