Piusi CUBE B.SMART, Installation, Use And Maintenance Manual

Page: 6 / 60

Installation, use and maintenance
M0546
6
/60
IMPROPER USE
OF THE UNIT
Improper use of the
device can cause
serious damage or
death.
!
Do not operate the unit when tired or under the influence of drugs or
alcohol.
Do not leave the work area while the unit is on and operating.
Turn off the unit when not in use.
Do not alter or modify the unit. Alterations or modifications to the unit may
invalidate its type-approval and result in dangers to safety.
Arrange the hose and the power cables always far from transit areas,
sharp edges, moving parts and hot surfaces.
Do not twist the hose or use a stronger hose.
Keep children and animals far from the work area
Observe all applicable safety regulations.
Do not exceed the maximum working pressure or temperature of the
component with the lowest system rating.
See the technical specifications in all machine manuals.
Use liquids and solvents that are compatible with the wet parts of the
unit. See the technical specifications in all machine manuals. Read
the manufacturer’s warnings for liquids and solvents. To obtain more
information about the material, request the Safety Data Sheet (MSDS)
from your distributor or dealer.
Check the unit every day. Repair or replace worn or damaged parts
immediately with original manufacturer’s spare parts only.
Make sure that the unit is classified and approved in accordance with the
regulations for the environment in which it is used.
Use only the unit for its intended purpose. Contact your distributor for
more information.
Keep hoses and cables away from transit areas, edges, moving parts and
hot surfaces.
Do not bend or bend the hoses too much or use the hoses to pull the unit.
DANGER OF
BURNS
To avoid severe burns, do not touch liquids or equipment
Danger of smoke
and toxic fluids.
For problems deriving from the product handled with eyes, skin, inhalation
and ingestion, refer to the safety data sheet of the fluid used.
Store treated liquids in suitable containers and in compliance with
applicable regulations.
Prolonged contact with the product handled may cause skin irritation;
always use protective gloves when dispensing.