Piusi CUBE B.SMART Installation, Use And Maintenance Manual Download

Page: 54 / 60

Installation, use and maintenance

M0546

/60

6 What if a driver changes his

phone number and keeps the

same smartphone?

If a driver changes number it is necessary to inform the

manager, who will change it from the driver’s card in the

WebApp (see also the manual of the WebApp, chapter

“DRIVER DETAIL”).

In the APP, the number is automatically updated the first time

you connect to the cloud. From now on the mobile phone

number will be the one to be used to access the APP.

In addition, in the case of mobile number portability between

different mobile operators, it is likely that for a few days

the mobile number will be the temporary one, and then the

mobile number will be the same again as soon as portability is

complete. In this case, during the transition period, there is no

need to notify the site manager of the temporary number, you

can continue to use your original telephone number.

Summary of Contents for CUBE B.SMART





























































Search results

Summary of Contents for CUBE B.SMART

Reviews:

Related manuals for CUBE B.SMART

Brands by name

Popular brands

Piusi CUBE B.SMART, Installation, Use And Maintenance Manual

Search results

Summary of Contents for CUBE B.SMART

Reviews:

Related manuals for CUBE B.SMART

Brands by name

Popular brands