Pitney Bowes Relay 1000, Operator'S Manual, Page: 61 / 64

Specifications • 6
SV63176 RevB 6-7
End Clearance End clearance between the contents and
envelope must be a minimum of 5mm on each
side (10mm overall). Take this measurement
with all contents placed into the envelope
Depth Clearance The contents must allow a minimum clearance
of 6mm below the flap crease after full insertion
into the envelope.
Manual Feeder M
Stapled or unstapled sets of up to 3 sheets of 80gsm bond paper can be
processed. Sheet Feeders A1 and A2 cannot be used in conjunction with
the Manual Feeder. Glossy/coated sheets are not recommended.
Sealer Capacity
The machine can seal up to a maximum of 1,000 envelopes between
refills.
Stacker
Stacker capacity is up to 60 filled envelopes, depending on the contents of
envelope.
Material Requirements
• Materials should be of good quality and properly stored
• Recommended storage conditions:
- 18° to 25°C
- 40 to 60% relative humidity