Pitney Bowes Relay 1000, Operator'S Manual, Page: 20 / 64

2 • System Setup
2-4 SV63176 RevB
Fill the Moistener
The oval window on the front of the
moistener provides an easy view of
the current fluid level. When the fluid
gets low, refill the moistener.
1. Slide the moistener out to the
right.
IMPORTANT!
Never open the moistener
while the system is processing material.
2. Carefully fill the moistener with
E-Z Seal
®
solution or water up to
the “Max” mark in the filler funnel.
We recommend E-Z Seal
®
to
minimize algae growth and scale
buildup.
3. Slide the moistener back into the system. From a dry state, the
moistener takes about five minutes to become fully wet and ready for
use.