Pitney Bowes Relay 1000, Operator'S Manual, Page: 11 / 64

System Overview • 1
1-5 SV63176 RevB
5
Moistener Tank
This tank contains E-Z Seal
®
solution or water to moisten and
seal envelope flaps. It slides out to the right for refilling and has
an oval level indicator window at the front that makes fluid level
checks quick and easy.
6
Lifting Handles (One Each Side)
Always lift the Relay 1000 using the side handles. DO NOT lift
the system by any of the feeders or the stacker.
7
Second Sheet Feeder A2 (Optional)
You can add this feeder to the system to enable folding and
inserting of a second sheet into the envelope. It functions in
exactly the same way as the standard sheet feeder A1.
IMPORTANT! When you use both sheet feeders A1 and A2
together, always load the address bearing sheet into sheet
feeder A2. If you fail to do this, the address won’t show in the
envelope window. Always load sheets into feeder A2 face down
and with the bottom edge of the sheet going first into the system.
8
Standard Sheet Feeder A1
This feeder enables folding and inserting of a sheet into the
envelope. Always load sheets into this feeder face down and
bottom edge first.
9
Manual Feeder M
Use this feeder to manually feed stapled sets of up to three
sheets each. The system waits for you to feed each set by hand
into this feeder before it folds and inserts the set automatically.
Always feed sheets into this feeder face down, bottom edge first.
10
Stacker
The system delivers finished pieces to this area.
11
Front Cover Release Button (Blue Button Marked “D”)
The display prompts you to press this button to release the front
cover if you need to remove jammed material.
12
Envelope Feeder B
This feeder sends envelopes into the inserting area where they
are filled with sheets or inserts from other feeders.