Pitney Bowes Relay 1000, Operator'S Manual, Page: 37 / 64

Run a Job ● 3
3-13 SV63176 RevB
Job 8
• Two collated, folded sheets
• No envelope
• Configuration required: Relay 1000
with optional Sheet Feeder A2.
NOTE : This job uses the second sheet feeder A2 in 2nd Page mode
to feed two-sheet, collated sets. Load sheets into the feeder in their
collated sequence: page one, page two, page one, page two and so on.
STEP ACTION TIP
1 Make sure the paper size
setting is correct.
NOTE: This setting is not
available on all models.
Select 11” or 14” .
2 Load sheets into Sheet
Feeder A2. See above for
loading sequence.
Load face down and bottom
edge first.
3 Press button to select Feeder
A2 and 2nd Page .
Make sure BOTH green
indicators are lit.
4 Press button to select Fold
Only .
Make sure indicators are green.
5 Press the Trial Piece button
and inspect trial piece
Check trial piece for a good
fold.
6 Press the Start button to run
job.
The Stop button will stop the
system at the end of the cycle.