manualshive.com logo in svg

Pitney Bowes Internet Fax Kit, User Manual, Page: 39 / 122

Share
Download
Pitney Bowes Internet Fax Kit User Manual Download Page 39

2.18

Programming and Retrieving One-touch/Speed-dialing setting

Retrieving One-touch/Speed-dialing settings

When you want to retrieve One-touch/Speed-dialing settings by mail, enter the following title on the Subject line.

%get-onetouch#xxxx%

(xxxx is the password for remote access.)

%get-speed-dial#xxxx%

(xxxx is the password for remote access.)

To edit the retrieved parameter, store the E-mail file as text (.txt) on your PC.

Note: When the mail is sent properly, you will receive mail that describes all One-touch/Speed-dialing settings.

Programming One-touch/Speed-dialing settings

To change or update the retrieved parameter, open the text file (.txt). Copy the body text and paste it on the body
of the newly created E-mail message. Delete any headers that may be present in the body of the E-mail.
When you want to program One-touch/Speed-dialing settings by mail, enter the following title on the Subject
line.

%set-onetouch#xxxx%

(xxxx is the password for remote access.)

%set-speed-dial#xxxx%

(xxxx is the password for remote access.)

Follow the following rules to program the settings:

1. All records should be enclosed with @start-record and @end-record.
2. You can not begin a new line in between @start-record and @end-record.
3. Do not enter other records on the lines containing @start-record and @end-record.

Each record should be entered as follows:

No.;Name;FaxNumber;MailAddress;FaxGroup;MailGroup;FileFormat;

4. Each parameter in a record should be separated with a semicolon (;).
5. You can not enter more than one record per line.
6. Each record should start at the beginning of a new line.

Note: According to the e-mail software or mail server, the long parameter may be divided into two or more lines

automatically. In this case, after entering about 70 characters, press Enter key to start a new line and put
one space at the beginning of the next line.

1

2

3

4

5

6

Value

One-touch numbers or Speed-dialing numbers

Mail address (maximum of 50 characters)

Fax number (maximum of 40 characters)

Group numbers for fax No.1~32 used
For multiple entries, separate with commas.
Only effective when fax number is designated. 

Group numbers for mail No.33~65 used
For multiple entries, separate with commas. 
Only effective when mail address is designated 

File format upon mail transmission
tiff-s/tiff/pdf
Only effective when mail address is designated

Parameter

No.

MailAddress

FaxNumber

FaxGroup

MailGroup

FileFormat

Summary of Contents for Internet Fax Kit



























































































































Reviews:

No comments