Pitney Bowes Internet Fax Kit User Manual Download Page 30

Page: 30 / 122

2.9

Setting E-mail account users

Registers the individual information, etc. needed to use this device to send and receive e-mail.
Using this feature, you can also register and/or edit user accounts as well as the default account.
Up to 30 accounts can be registered.

Note: A default account is an account used when the account cannot be specified when forwarding received fax

and archiving sent/received faxes. If the default account is not registered, some functions may not be
available.

Register new e-mail account

Start up “Administration tool for Internet Fax Kit”. Click E-mail account users under [Operation set-
ting].

To register a new account, click Register new “ account user” .

Fill in each of the following fields, and then click the [REGISTER ACCOUNT] button.

Summary of Contents for Internet Fax Kit



























































































































Search results

Summary of Contents for Internet Fax Kit

Reviews:

Related manuals for Internet Fax Kit

Brands by name

Popular brands

Pitney Bowes Internet Fax Kit, User Manual

Search results

Summary of Contents for Internet Fax Kit

Reviews:

Related manuals for Internet Fax Kit

Brands by name

Popular brands