manualshive.com logo in svg

Pitney Bowes Internet Fax Kit, User Manual, Page: 104 / 122

Share
Download
Pitney Bowes Internet Fax Kit User Manual Download Page 104

5.19

For 5000:

“Archive Tx Fax” setting

1

Press MENU, 3, 8, 4, ENTER.

2

Use the cursor key to select “On” and then press ENTER.

4

Enter a e-mail address using the numeric keypad and press ENTER. You can enter e-mail address up to
50 characters length.

Note: Only one e-mail address can be entered for archiving.

5

Press ENTER to save the setting.

6

Press STOP to finish.

“Archive Rx Fax” setting

1

Press MENU, 3, 8, 5, ENTER.

2

Use the cursor key to select “On” and then press ENTER.

4

Enter a e-mail address using the numeric keypad and press ENTER. You can enter e-mail address up to
50 characters length.

Note: Only one e-mail address can be entered for archiving.

5

Press ENTER to save the setting.

6

Press STOP to finish.

MailAddress;Lower
[email protected]_

MailAddress;Lower
_

Archive Rx Fax  :Off

/

/Enter

MailAddress;Lower
[email protected]_

MailAddress;Lower
_

Archive Tx Fax  :Off

/

/Enter

Summary of Contents for Internet Fax Kit



























































































































Reviews:

No comments