Pitney Bowes DI500 Operator'S Manual Download Page 77

Page: 77 / 128

Optical Mark Recognition (OMR) • 5

5-17

SV40221 Rev. C

View OMR Code

This function lets a Supervisor view any current OMR codes, which

are stored in the machine’s memory.

Action…

Select

View OMR Code

from the

OMR Menu

screen.

A list of all the current OMR Codes will be displayed. Select the OMR

code you wish to view from the list using the

▲▼◄►

keys in the

normal way.
The highlighted OMR code will then be displayed on the left side of

the screen.
If you require more detailed information about the code, either select

the relevant screen key for that code or press the

key once the

relevant code has been highlighted.

Scroll up and down the selected OMR code by using the ▲ and ▼

navigation keys to review detailed information about the selected

code.

TIPS:

The representation of the OMR mark on the left hand

side of the screen will display as a dashed line if the

‘Absent’ option is selected.
This function is not available if there are no OMR codes

to view.

Summary of Contents for DI500

































































































































Search results

Summary of Contents for DI500

Reviews:

Related manuals for DI500

Brands by name

Popular brands

Pitney Bowes DI500, Operator'S Manual

Search results

Summary of Contents for DI500

Reviews:

Related manuals for DI500

Brands by name

Popular brands