Pitney Bowes DI500 Operator'S Manual Download Page 76

Page: 76 / 128

5 • Optical Mark Recognition (OMR)

5-16

SV40221 Rev. C

Delete OMR Code

This function lets a Supervisor delete a current OMR code which is

stored in the machine’s memory.

Action…

Select

Delete OMR Code

from the

OMR Menu

screen.

A list of all the current OMR Codes will be displayed. Select the OMR

code you wish to delete from the list using the

▲▼◄►

keys in the

normal way.
Once selected, a message will be displayed asking you to confirm

that you want to delete the selected code.
Either...

• Select

Yes

to confirm deletion.

• Select

to return you to the

OMR Menu

without deleting

any codes.

TIPS:

Make sure that the code you are deleting is the correct

code! Once deleted, it cannot be retrieved.

This function is not available if there are no OMR codes

to delete.

Any code that is being used within a saved Job

Definition cannot be deleted. You must first either delete

the relevant Job Definition(s), or edit the affected Job

Definition(s) to use a different OMR code.

Summary of Contents for DI500

































































































































Search results

Summary of Contents for DI500

Reviews:

Related manuals for DI500

Brands by name

Popular brands

Pitney Bowes DI500, Operator'S Manual

Search results

Summary of Contents for DI500

Reviews:

Related manuals for DI500

Brands by name

Popular brands