Pitney Bowes DI500, Operator'S Manual

Page: 15 / 128

Introduction • 1
1-7 SV40221 Rev. C
Manual Feeder (also known as Convenience Feeder or Daily
Mail Feeder)
Use this feeder to manually feed stapled or unstapled sets of
up to 5 sheets (see specifications, page 7-2). The machine
waits for each set to be manually fed before folding and
inserting the set automatically into the envelope. A Supervisor
can also configure the machine to place insert(s) within the set
if Insert Feeder(s) are fitted.
Insert Feeder(s) (not on all model confguratons)
Use these feeders to add additional inserts to your envelope.
Inserts fed from these feeders cannot be folded by the
machine, so they must already be folded or be a size that
does not require folding.
Drop Stacker
(not llustrated)
A fold down stacker is located at the exit from the machine
to collect the finished Mail Pieces. This unit can be latched
against the machine when not in use.
Power stacker
(not llustrated)
This is an option which automatically collects and neatly
stacks finished Mail Pieces. It locates at the exit of the
machine, in place of the Drop Stacker.
Mailing Machine Interface
(not llustrated)
This is an option which automatically transports Mail Pieces to
a Pitney Bowes Mailing Machine for postal ‘franking’.
Sealer Bottle
The sealer bottle is located inside an opening cover at the
front right side of the machine. It provides sealing solution to
the Envelope Sealer.
Manual Advance Knob
The Manual Advance Knob is located inside an opening cover
at the lower center of the machine. It can be used to manually
turn the machine mechanisms to assist in clearing a material
stoppage.
Measuring Scale
The scale is located on the left side of the machine near the
sheet feeders as an aid in measuring material and envelopes.
Envelope Feeder
This feeder feeds envelopes into the inserting area where they
are filled with the material requested from the other feeder(s).
3
4
5
6
7
8
9