Pitney Bowes DI500, Operator'S Manual

Page: 12 / 128

1 • Introduction
1-4 SV40221 Rev. C
Machine Configurations
The following machine configurations are available, depending on
your local market:
• Two Sheet Feeders Only
• Four Sheet Feeders Only
• Two Sheet Feeders and One Insert Feeder
• Two Sheet Feeders and Two Insert Feeders
• Four Sheet Feeders and One Insert Feeder
• Four Sheet Feeders and Two Insert Feeders
Each feeder location has its own letter designation which remains
the same irrespective of machine configuration. Therefore, machine
configurations with less than the full complement of feeders will use
feeder designations which are not in alphabetical sequence – this is
normal.
The processing speed will also vary depending on machine
configuration. See ‘Specifications’ in Chapter 7 for further details.
The illustration on the next page shows feeder locations and
designations.
In addition, an Optical Mark Recognition (OMR) option can be added
to any model. This allows control of machine functions and Mail
Piece make-up by ‘scanning’ material passing through the machine
for machine readable marks (OMR Marks). For further information,
refer to Chapter 5 of this guide.
This guide covers all models. If a function is dependent on machine
configuration, the accompanying text will explain this.