Piranha CNC Plasma Cutting Table, Operating Manual

Page: 157 / 176

APPENDIX A
– FastCAM SETUP
Sept-2018
157
8. You can nest the part manually, the yellow frame is your material sheet, after you import/add part, you
will be able to see the part inside the yellow frame. For example:
i. Click one the part you want to move with left button of mouse, keep holding left it and do not let it go
until the part move the better new spot;
ii. The broken yellow line shows the part you are moving with your mouse, if the part is over the edge of is
too close to another part, the color will change to red (like the letter E in the picture below);