Piranha CNC Plasma Cutting Table, Operating Manual, Page: 98 / 176

MAINTENANCE
Sept-2018
98
PROCEDURE
– UPDATING CONTROL SOFTWARE FROM USB DRIVE
1. Before putting in the USB drive, push the update ARROW and turn on the
power button;
2. When the screen starts to change, release the button;
3. when the screen stops changing, locate and note the version of STARFIRE
control software on the screen.
4. Choose the USB for updating the control from that version;
5. Turn the power supply off, plug in the USB drive;
6. Hold the update ARROW down and turn the power on;
7. Release the button when the screen starts to change
8. You will see the blue screen with two white squares on bottom left;
9. Push F1;
10. Turn off the power with the red power button when the screen stops changing.
11. Re-start the control with the red power button
UPDATE ARROW
USB PORT
POWER BUTTON