Quick start guide
6
En
Connecting your TV and DVD player
1
Connect your DVD player to the receiver.
Connect a 3-pin AV cable (not supplied) between the
audio/video outputs of your DVD player and the
DVD IN
jacks of this receiver for the video and analog audio.
For digital audio, connect a coaxial digital audio cable
(not supplied) between your DVD player’s coaxial digital
output and the
DVD(TV/SAT) COAX
jack on this
receiver.
• If your DVD player doesn’t have a coaxial digital out
you can use an optical cable connected between the
optical output jack on your DVD player and the
TV/
SAT(DVD) OPT1
jack on this receiver. However, you
will have to reassign the input to DVD before using
for the first time. See
Optical input setting
on page 36
for how to do this.
• If you connect an optical digital cable, be careful
when inserting the plug not to damage the shutter
protecting the optical socket.
2
Connect your TV to the receiver.
Use a standard video cable (not supplied) to connect the
MONITOR OUT
video jack on this receiver to a video
input on your TV.
3
Connect the supplied AC power cable to the AC
IN on this receiver and plug in the other end to a
power outlet.
Switching on and playing a DVD
Once you switch the receiver on it will automatically
detect the speakers you have connected. Although there
are a number of more detailed settings you can make to
optimize the surround sound, you should be able to get
acceptable surround sound performance right away.
1
Switch on your TV and powered subwoofer.
Also make sure that your TV is set to the AV input you
connected the receiver to.
2
Press
RECEIVER on the remote or
STANDBY/
ON on the front panel to switch on the receiver.
3
Press DVD on the remote or turn the INPUT
SELECTOR knob on the front panel to select the DVD
input.
4
Switch on your DVD player.
5
Load a DVD and start playback.
This receiver will automatically decode Dolby Digital,
DTS, or Dolby Surround DVD-Video discs, according to
your speaker setup. In most cases, you won’t have to
make changes for realistic surround sound.
Other possibilities (like listening to a CD with
multichannel surround sound) are explained in
Home
theater sound
on page 27.
6
Use the MASTER VOLUME control (front panel or
remote) to adjust the volume.
• Turn down your TV’s volume so that you only hear
sound from this system.
COAX
AC IN
IN
FRONT
L
R
DVD
MONITOR
OUT
FM UNBAL 75
Ω
AM LOOP
ANTENNA
SUB
WOOFER
OUT
TV/SAT
(DVD)
OPT1
DVR/VCR
OPT2
DVD
(TV/SAT)
IN
VIDEO
IN
VIDEO
L
R
TV/SAT
IN
DVR/VCR
OUT
L
R
DIGITAL IN
TWO VOLTAGE SELECTORS
110V
120 -127V
220 -230V
240V
110V
220 -230V
240V
120-127V
SUB WOOFER
CENTER
SURROUND
CONTROL
AUDIO IN (5.1CH)
IN
OUT
SPEAKERS
FRONT
SURROUND
R
CENTER
SURROUND
BACK
L
R
L
+
–
AUDIO
TV
AUDIO
L
R
VIDEO
VIDEO
VSX-C501
DVD player
DIGITAL AUDIO OUT
OPTICAL
vsx-c501(FL).book 6 ページ ２００３年６月１３日 金曜日 午後１２時４６分
