Controlling other equipment
10
39
En
Recalling preset codes
The following steps show you how to recall preset codes
for each input and for the
TV CONTROL
buttons.
1
Press RECEIVER and number button ‘1’ at the
same time.
The LED starts blinking.
• To cancel the preset mode at any time press
RECEIVER
.
• The remote control will also return to the previous
mode after one minute of inactivity.
2
Press DVR/VCR or TV/SAT depending on which
you want to preset.
• To preset the
TV CONTROL
buttons, press
TV
CONTROL
.
The LED stops blinking and remains lit.
3
Use the number buttons to enter a 3 digit setup
code.
See
Preset code list
on page 41 for a list of all the codes of
different types of equipment.
The LED starts blinking again.
After entering a code, a power on/off command is
transmitted by the remote. If the component you want to
control can be switched on/off by remote, it should now
switch on/off.
If the other component fails to switch on/off, try another
preset code if there is one available.
4
Repeat process to assign preset codes for as
many components as you want.
Note
• See
Preset code list
on page 41 for the components
and manufacturers available.
• The preset codes cover a wide variety of equipment,
however, there may be some models from a
particular manufacturer that do not work with any of
the available codes.
• With some components, not all functions are
controllable by this remote.
• Refer to
VCR / DVD / LD player and DVD recorder
controls
on page 42 and
Cable TV / satellite TV / digital
TV / TV controls
on page 43 for detailed information on
the function of individual buttons.
Remote Direct function
• Default setting: All inputs –
ON
On the default setting, when you press an input select
button (
DVD
,
DVR/VCR
, etc.), both the receiver input
source and the remote control change to the selected
function.
When an input select button is set to
OFF
, pressing that
button changes the function of the remote control only.
This can be useful when you want to operate one
component without interrupting playback of another.
When set to
OFF
, use the
INPUT
button to change the
input source of the receiver.
1
Press RECEIVER and number button ‘4’ at the
same time.
2
Press the input select button you want to set the
remote direct mode for.
Select
DVD
,
DVR/VCR
or
TV/SAT
. (You can’t select
FM/
AM
.)
3
Press ‘1’ to set the remote direct mode to ON or
‘2’ to set to OFF.
4
Press RECEIVER to finish.
AUDIO
SLEEP
RECEIVER
INPUT
DVD
VIDEO
TV/SAT
FRONT
FM/AM
DVR/VCR
SURROUND
ADVANCED
SURROUND
SOUND
MODE
SIGNAL
SELECT
DIALOG
AUTO
STEREO
LEVEL
TEST TONE
CH SELECT
MUTE
MASTER
VOLUME
DTV MENU
TOP MENU
T.EDIT
MENU
GUIDE
SUBTITLE
MCACC
SETUP
TUNE
TUNE
ST
ST
SYSTEM
SETUP
BAND
DTV ON/OFF
RETURN
DTV INFO
A
DISPLAY
CLASS
MPX
D.ACCESS
ENTER
B
C
D
E
DISC
10
ENTER
SBch MODE
DIMMER
TV CONTROL
CHANNEL
CHANNEL
VOLUME
INPUT
vsx-c501(FL).book 39 ページ ２００３年６月１３日 金曜日 午後１２時４６分
