2
En
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away in a
safe place for future reference.
In some countries or regions, the shape of the power plug
may sometimes differ from that shown in the explanatory
drawings. However, the method of con-necting and
operating the unit is the same.
Operating Environment
Operating environment temperature and humidity:
+5
°
C – +35
°
C (+41
°
F – +95
°
F); less than 85% RH
(cooling vents not blocked).
Do not install in the following locations:
• Location exposed to direct sunlight or strong
artificial light
• Location exposed to high humidity, or poorly
ventilated
location
H045 En
VENTILATION:
When installing this unit, make sure to leave space around the unit for ventilation to
improve heat radiation (at least 20 cm at top, 50 cm at rear, and 10 cm at each side).
WARNING:
Slot and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and
covered with items, such as newspapers, tablecloths, curtains, etc. Also do not put the apparatus on the thick
carpet,
bed,
sofa,
or
fabric
having
a
thick
pile.
H040 En
CAUTION:
THE STANDBY/ON BUT TON IS SECONDARY
CONNECTED AND THEREFORE DOES NOT SEPARATE
THE UNIT FROM MAINS POWER IN STANDBY
POSITION. THEREFORE INSTALL THE UNIT SUITABLE
PLACES EASY TO DISCONNECT THE MAINS PLUG IN
CASE OF THE ACCIDENT. THE MAINS PLUG OF UNIT
SHOULD BE UNPLUGGED FROM THE WALL SOCKET
WHEN LEFT UNUSED FOR A LONG PERIOD OF TIME.
H017BEn
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty period.
K041_En
NOTE:
THE NO USER-SERVICEABLE PARTS COMPARTMENT WARNING IS LOCATED ON THE APPLIANCE BONNET
TWO VOLTAGE SELECTOR SWITCHES
(multi-voltage model only)
Only multi-voltage model is provided with these
switches. Mains voltages in Saudi Arabia are 127 V
and 220 V only. Never use this model with the 110 V
setting in Saudi Arabia.
The line voltage selector switches are on the rear panel.
Check that they are set properly before plugging the
power cord into the household wall socket. If the voltage
is not properly set or if you move to an area where the
voltage requirements differ, adjust the selector switches
as follows.
1. Use a medium-size screwdriver.
2. First, insert the screwdriver in the groove of the
voltage selector at the right, and adjust so that the
tip of the groove points to the voltage value of your
area.
3. Next, insert the screwdriver in the groove of the
voltage selector at the left and adjust until the
voltage is the same as at the right.
CAUTION 220 -230 V
Power source voltage is factory adjusted 220-230 volts. If your
area is different, change voltage selectors settings.
TWO VOLTAGE SELECTORS
110V
220 -230V
240V
110V
120 -127V
220 -230V
240V
120-127V
vsx-c501(FL).book 2 ページ ２００３年６月１３日 金曜日 午後１２時４６分
