manualshive.com logo in svg

Pioneer Remix station RMX-1000, Service Manual

Share
Download
Pioneer Remix station RMX-1000 Service Manual Download Page 51

51

RMX-1000

5

6

7

8

5

6

7

8

A

B

C

D

E

F

8

 Mode 

8

: "RBN" for confirmation of the X-PAD

•  This mode is for confirming X-PAD values with the I

N

PUT level indicator and the 7-segment indicator.

 

W

hen this mode is entered, “rbn” is displayed for 1 second on the 7-segment indicator.

•  The data item for a touched position on the X-PAD is expressed as a figure in the range of 0 to 127 and displayed on the 

 7-segment 

indicator.

  The LEDs of the I

N

PUT level indicator light according to the position touched on the X-PAD.

•  The X-PAD consists of 5 sensors.

  A touched sensor is indicated by the corresponding LED so that you can judge if it is functioning properly.

Part and indicators to be used for the operation

Position indication

Position indication

The LED corresponding to a touched sensor lights.

Part to be operated

X-PAD

Indicators to be lit

I

N

PUT level indicator

Right: Lights off
Left: Full Illuminate

Remarks

X-PAD

7-segment indicator

Right: 0
Left: 127

X-PAD sensor 1

X-PAD LED 1

X-PAD sensor 2

X-PAD LED 2

X-PAD sensor 3

X-PAD LED 3

X-PAD sensor 4

X-PAD LED 4

X-PAD sensor 5

X-PAD LED 5

Summary of Contents for Remix station RMX-1000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands