45
RMX-1000
5
6
7
8
5
6
7
8
A
B
C
D
E
F
3. Description of Test Mode
1
Mode 1: "VER" for confirmation of the versions
• This mode is for confirming the versions of the system, MAI
N
UCOM (SH UCOM), SUB UCOM (K0R UCOM),
DSP [program], and DSP [data].
After entering this mode, "
V
Er" is displayed on the 7-segment indicator for about 1 sec then version display starts.
• Five modes for displaying the versions of the system, MAI
N
UCOM (SH UCOM), SUB UCOM (K0R UCOM), DSP [program],
and DSP [data] are provided with this mode. These five modes can be switched, using the
N
UDGE + or – button.
W
hen these modes are switched, the name of the software is displayed for about 1 sec then its version is displayed.
W
hen Mode 1 is entered, the System
V
ersion Display mode is automatically entered.
2
Mode 2: "CLR" for making all LEDs and the 7-segment indicator unlit
• This mode is for making all LEDs and the 7-segment indicator unlit.
Only after this mode is entered, “CLr” is displayed for 1 second on the 7-segment indicator.
Note:
The FX SOURCE I
N
PUT, FX SOURCE X-PAD, QUA
N
TIZE, X-PAD, AUTO, and HOLD buttons are lit dimly.
3
Mode 3: "SET" for making all LEDs and the 7-segment indicator lit
• This mode is for making all LEDs and the 7-segment indicator lit.
Only after this mode is entered, “Set” is displayed for 1 second on the 7-segment indicator.
•
W
hile holding the AUTO button pressed, you can adjust the luminance of the SCE
N
E FX indicator by turning the
ISOLATE FX LO
W
or MID control.
To change the
software to be displayed
Display of the name of
software and version
7-segment
indication
Name of
software
SYS
System
MAi
MAI
N
UCOM (SH UCOM)
SUb
SUB UCOM (K0R UCOM)
d_P
DSP (program)
d_d
DSP (data)
Control
ISOLATE FX LO
W
knob
LED to be lit
SCE
N
E FX indicator (red)
Remarks
"MI
N
": To be unlit
"MAX": Maximum luminance
ISOLATE FX MID knob
SCE
N
E FX indicator (blue)
"MI
N
": To be unlit
"MAX": Maximum luminance
