manualshive.com logo in svg

Pioneer Remix station RMX-1000, Service Manual

Share
Download
Pioneer Remix station RMX-1000 Service Manual Download Page 31

31

RMX-1000

5

6

7

8

5

6

7

8

A

B

C

D

E

F

5.4  ERROR INDICATIONS

No.

1

SD card LED operation

Meaning

Remarks

5-time flashing at intervals of 
100 msec

Start of electrostatic recovery process of 
X-PAD

This state can occur during normal startup.

3

Flashing at intervals of 500 msec 
is cyclically performed at intervals 
of 2 sec.

Sampler data read error

6

Lit

N

ormal status

This unit has completed mounting of 
an SD card.

The SD card LED flashes twice quickly and 
repeatedly after an SD card is loaded.

4

Flashing at intervals of 250 msec

Detection of abnormal voltage

W

hen this error is generated, all LEDs other than 

the SD card LED of this unit are unlit. 
They are not lit even dimly.
The unit will not be started.

2

Continuous flashing at intervals of 
200 msec

Connection error of X-PAD
/DSP initialization error

If this error is generated, the unit can start, but the 
SD card drive and X-PAD do not respond.
Key operations are enabled.

5

Flashing at intervals of 1 sec

N

ormal status

An SD card is being identified. 

W

hen no USB 

device is connected, this unit is attempting to 
mount an SD card. 

W

hen a USB device is 

connected, the PC is attempting to mount an 
SD card or mounting of an SD card has been 
completed.

W

hen an error is generated, the type of error is indicated with the 7-segment indicator or the SD card LED.

1. Indication with the 7-segment indicator

2. Indications with the SD card LED (indications for normal statuses included)

No.

1

7-segment indicator

Meaning

Remarks

[Err] indication

Customized data (.RSD data) damaged

The [Err] indication will disappear when the SD card 
is unloaded.

2

[Err] indication

ROM writing error

This error may be generated when the following 
operations are performed:
• Sync is performed in RemixBox.
• The MIDI setting is changed.

Summary of Contents for Remix station RMX-1000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands