Pioneer PRA-BD11, Service Manual

Page: 88 / 98

PRA-BD11
88
1 2 3 4
1 2 3 4
C
D
F
A
B
E
No. Pin Name I/O Pin Function
31 TP08 O FPGA test signal output (Not connected at AVIB side)
32
33 TP09 O FPGA test signal output (Not connected at AVIB side)
34 TP10 O
FPGA test signal output (Not connected at AVIB side)
35 TP11 O
FPGA test signal output (Not connected at AVIB side)
36 TP12 O
FPGA test signal output (Not connected at AVIB side)
37 TP13 O FPGA test signal output (Not connected at AVIB side)
38
39
40
41 TP14 O FPGA test signal output (Not connected at AVIB side)
42 TP15 O FPGA test signal output (Not connected at AVIB side)
43 TP16 O
FPGA test signal output (Not connected at AVIB side)
44 DINB_EXIST O
A signal to judge that DINB is mounted H: DINB is mounted, L: DINB is not mounted
45 SDI_VALID O
The signal which shows whether a SDI signal is valid
H: A valid SDI signal is input, L: There is not input signal, or a invalid SDI signal is input
46 SDI_NP O The signal which shows whether a SDI signal is NTSC or PAL H:NTSC, L:PAL
47 AES_LRCK O LR clock output for AES/EBU
48 AES_DAI O
Data output for AES/EBU
49 AES_BCK O
Audio clock output for AES/EBU
50
51
52
53
54
55
56
57 20_V I Vsync input
58 20_H I
Hsync input
59 20_STD0 I
Video standard input
60 20_STD1 I
Video standard input
61 20_STD2 I Video standard input
62 20_RESET# O Reset output
63 14_CE I Channel Status or Fs Indicator input
64
65
66
67 14_CD I
Channel Status or Fs Indicator input
68 14_CC I
Channel Status or Fs Indicator input
69 14_CB I Channel Status or Error Status input
70 14_CA I Channel Status or Error Status input
71 14_C0 I Channel Status or Error Status input
72
73 14_C I
Channel status input (serial)
74 14_CS12 O
Selection setting output of sub frame 1 or sub frame 2
75 14_SEL O
Selection setting of pin function of C0 to CE
76
77 CLK_128FS I
Same as the SDI_BCK
78
79
CLK_27MFPGA I The 27MHz clock which generated from SDI
80
GND
−
Digital GND
Vcco
−
I/O power supply (3.3V)
Vccint
−
Core power supply (2.5V)
GND
−
Digital GND
Vccint
−
Core power supply (2.5V)
Vcco
−
I/O power supply (3.3V)
GND
−
Digital GND
Vccint
−
Core power supply (2.5V)
Vcco
−
I/O power supply (3.3V)
GND
−
Digital GND
GND
−
Digital GND
Vcco
−
I/O power supply (3.3V)
N.C.
−
N.C.
N.C.
−
N.C.
M1 I Configuration setting (default "L", master serial mode)
M0 I
Configuration setting (default "L", master serial mode)
M2 I Configuration setting (default "L", master serial mode)
GND
−
Digital GND