Pioneer ELITE VSX-LX304 Instruction Manual Download Page 97

Page: 97 / 180

≫

≫

≫

≫

≫

≫

ZONE B Playback

While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifie, etc. (ZONE B)

(

p59

)

connected to the ZONE B LINE OUT jack at the same time.

Playing Back

1. Press the

button on the remote controller to select "Audio" - "Zone B".

•

In the following cases, "Zone B" cannot be selected.

– When ZONE 2 is On

–

When "System Setup" - "Speaker" - "Configuration" - "Zone 2 Preout" on

the Home screen is set to something other than "Zone B" (

p128

)

2. Select an audio output destination.

Off:

Outputs audio only to ZONE A. "A" on the display of the main unit lights

up.

On(A+B):

Outputs audio to both ZONE A and ZONE B. "A" and "B" on the

display of the main unit light up.

On(B):

Outputs audio only to ZONE B. "B" on the display of the main unit

lights up.

3. Start play on the AV component.

Adjust the sound volume on the pre-main amplifier, etc. of ZONE B.

•

When "Zone 2 Preout" is set to "Zone B" and "Audio" - "Zone B" at AV Adjust is

set to "On (A+B)", the output of ZONE A is as shown below.

– The tone cannot be adjusted.

–

"System Setup" - "Speaker" - "Crossover" - "Double Bass" (

p129

) on

the Home screen is fixed to "On".

–

The effect of "System Setup" - "Speaker" - "Distance" (

p130

) on the

Home screen turns off.

•

If "On (A+B)" is selected as an audio output destination, you can select only

the "Stereo" listening mode for ZONE A when using the 2.1ch speaker layout.

When using a speaker layout of 3.1ch or more, you can select only the "Ext.

Stereo" listening mode.

Summary of Contents for ELITE VSX-LX304





















































































































































































Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands

Pioneer ELITE VSX-LX304, Instruction Manual

Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands