Pioneer ELITE VSX-LX304 Instruction Manual Download Page 9

Page: 9 / 180

≫

≫

≫

≫

≫

≫

6. Select "System Setup" - "Miscellaneous" - "Firmware Update" - "Update via

USB" with the cursors in order, then press ENTER.

•

If "Firmware Update" is grayed out and cannot be selected, wait for a while

until it starts up.

•

If there is no updatable firmware, "Update via USB" cannot be selected.

7. Press ENTER with "Update" selected, and start update.

• During the update, the TV screen may go black depending on the program

to be updated. In such a case, check the progress on the display of the

unit. The TV screen will remain black until the update is completed and the

power is turned on again.

•

During the update, do not turn the power off, or disconnect or reconnect the

USB storage device.

• When "Completed!" is displayed, the update is complete.

8. Disconnect the USB storage device from the unit.

9. Press

STANDBY/ON on the main unit to turn the unit into standby mode.

The process is completed, and your firmware is updated to the latest version.

• Do not use on the remote controller.

If an Error Message is Displayed

If an error occurs, "





Error!" is displayed on the display of the unit. ("



represents an alphanumeric character.) Refer to the following descriptions and

check.
Error Code

•



-01,



-10:

The USB storage device cannot be recognized. Check if the USB storage

device or USB cable is securely inserted to the USB port of the unit.

Connect the USB storage device to an external power source if it has its own

power supply.

•



-05,



-13,



-20,



-21:

The firmware file is not present in the root folder of the USB storage device, or

the firmware file is for another model. Retry from the download of the firmware

file.

• Others:

After removing the power plug once, insert it to the outlet, and then start the

operation from the beginning.

Summary of Contents for ELITE VSX-LX304





















































































































































































Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands

Pioneer ELITE VSX-LX304, Instruction Manual

Search results

Summary of Contents for ELITE VSX-LX304

Reviews:

Related manuals for ELITE VSX-LX304

Brands by name

Popular brands