Control with HDMI function
07
68
En
HDMI Setup
You must adjust the settings of this receiver as
well as the connected
Control
with HDMI-
compatible components in order to make use
of the
Control
with HDMI function. For more
information see the operating instructions for
each component.
1
Press
, then press HOME
MENU.
2
Select ‘System Setup’, then press ENTER.
3
Select ‘Other Setup’, then press ENTER.
4
Select ‘HDMI Setup’, then press ENTER.
5
Select the ‘Control’ setting you want.
Choose whether to set this unit’s
Control
with
HDMI function
ON
or
OFF
. You will need to set
it to
ON
to use the
Control
with HDMI
function.
When using a component that does not
support the
Control
with HDMI function, set
this to
OFF
.
•
ON
– Enables the
Control
with HDMI
function. When this unit’s power is turned
off and you have a supported source begin
playback while using the
Control
with
HDMI function, the audio and video
outputs from the HDMI connection are
output from the TV.
•
OFF
– The
Control
with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio
and video of sources connected via HDMI
are not output.
6
Select the ‘Control Mode’ setting you
want.
Choose whether you want to enable HDMI for
all linked functions or the PQLS function only.
However, Display Power Off will activate the
settings set forth in step 7 below.
•
ALL
– Enabled for all linked functions.
•
PQLS
– Enabled only for the PQLS function.
When
PQLS
is selected, link functions
other than the PQLS function may not work
properly. If you wish to use all link
functions, select
ALL
.
7
Select the ‘Display Power Off’ setting
you want.
If the TV’s power is turned off while using the
Control
with HDMI function, the receiver’s
power is also turned off (all power off function).
This function can be disabled.
•
YES
– The all power off function is enabled.
The receiver’s power turns off together with
the TV’s power.
This function only works when the input for
a component connected to the receiver by
Control
with HDMI is selected or when
watching the TV.
•
NO
– The all power off function is disabled.
The receiver’s power is not affected when
the TV’s power is turned off.
8
When you’re finished, press HOME MENU.
You will return to the
Home Menu
.
RECEIVER
2. Volume Setup
3. Remote Control Mode Setup
4. Flicker Reduction Setup
5. Pairing Bluetooth Device
1. HDMI Setup
4e.Other Setup
A/V RECEIVER
Exit
Return
4e1.HDMI Setup
A/V RECEIVER
Exit
Finish
Control
: ON
Control mode
:
ALL
Display Power Off
:
YES
VSX-31_30_UC.book 68 ページ ２０１０年８月２５日 水曜日 午前９時２８分
