Pioneer Elite SC-35, Operating Instructions Manual

Page: 119 / 148

The System Setup and Other Setup menus 12
119
En
The Other Setup menu
The Other Setup menu is whe r e you can make
customized settings to r eflect how you a r e using the
r eceive r .
1 Set the remote control to the receiver operation
mode, then press HOME MENU.
A G r a p hical Use r Inte r face (GUI) sc r een a pp ea r s on you r
TV. Use
///
and ENTER to navigate th r ough the
sc r eens and select menu items. P r ess RETURN to
confi r m and exit the cu rr ent menu.
2 Select ‘System Setup’ from the Home Menu.
3 Select ‘Other Setup’, then press ENTER.
4 Select the setting you want to adjust.
If you a r e doing this fo r the fi r st time, you may want to
adjust these settings in o r de r :
• HDMI Setup – Synch r onizes this r eceive r with you r
Pionee r com p onent su pp o r ting Control with HDMI
( p age 73).
• Volume Setup – Sets u p the volume- r elated
o p e r ations of this r eceive r (see below).
•
Remote Control Mode Setup
– Sets this r eceive r ’s
r emote cont r ol mode (see below).
• Flicker Reduction – Adjusts the way the GUI sc r een
looks ( p age 120).
• RF Remote Setup (SC-37 only) – Allows the CU-
RF100 to be used even when the r eceive r is in the
standby mode ( p age 120).
• EXTENSION Setup
(SC-35 only)
– Allows the CU-
RF100 to be used even when the r eceive r is in the
standby mode ( p age 120).
•
Multi Ch In Setup
– S p ecifies the o p tional settings fo r
a multi-channel in p ut ( p age 120).
• Pairing Bluetooth Setup – Use to p ai r a Bluetooth
ADAPTER and Bluetooth wi r eless technology device
( p age 58).
5 Make the adjustments necessary for each setting,
pressing RETURN to confirm after each screen.
Volume Setup
You can set the maximum volume of this r eceive r o r
s p ecify what the volume level will be when the p owe r is
tu r ned on.
1 Select ‘Volume Setup’ from the Other Setup menu.
2 Select the Power ON Level setting you want.
The volume can be set so that it is always set to the same
level when the
r eceive r ’s p owe r is tu r ned on.
• LAST (default) – When the p owe r is tu r ned on, the
volume is set to the same level as when the p owe r
was last tu r ned off.
• “ --- ” – When the p owe r is tu r ned on, the volume is set
to minimum level.
•
–80.0dB
to
+12.0dB
– S p ecify the volume to be set
when the p owe r is tu r ned on, in ste p s of 0.5 dB.
It is not p ossible to set a volume level g r eate r than the
value s p ecified at Volume Limit setu p (see below).
3 Select the Volume Limit setting you want.
Use this function to limit the maximum volume. The
volume cannot be inc
r eased above the level set he r e,
even by o p e r ating MASTER VOLUME button (o r the dial
on the f r ont p anel).
•
OFF
(default) – The maximum volume is not limited.
•
–20.0dB
/
–10.0dB
/
0.0dB
– The maximum volume is
limited to the value set he r e.
4 Select the Mute Level setting you want.
This sets how much the volume is to be tu r ned down
when MUTE is pr essed.
•
FULL
(default) – No sound.
• –40.0dB / –20.0dB – The volume will be tu r ned down
to the level s p ecified he r e.
5 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
Remote Control Mode Setup
• Default setting: 1
This sets this r eceive r ’s r emote cont r ol mode to pr event
e rr oneous o p e r ation when multi p le units of the r eceive r
a r e being used.
1 Select ‘Remote Control Mode Setup’ from the
Other Setup menu.
2 Select the Remote Control Mode setting you want.
3 Select “OK” to change the remote control mode.
4 Follow the instructions on the screen to change the
remote control’s setting.
See
Operating multiple receivers
on p age 84 (SC-37)/
p age 96 (SC-35).
5 When you’re finished, press RETURN.
You will r etu r n to the Other Setup menu.
SC-37_35_UXJCB.book 119 ページ ２０１０年３月９日 火曜日 午前９時３２分