(2) The wireless remote control is not effective.
Is there a signal output specified
below at Pin 6 of the PW connector?
5Vp-p
YES
NO
Is there a signal output specified
below at Pin 1 of the LD connector?
5Vp-p
NO
YES
NO
The 232C PWB or the RS
connector is fault.
YES
Is there a 0Vdc output at Pin 12 of the
RS connector?
YES
NO
(Caution)
Since the detection of “wired” or “wireless” is conducted for the remote control
through the remote terminal, it is necessary to pull out the remote control cable
from the remote terminal, without fail. Troubleshooting should be carried out after
confirming that “IR REMOTE” is set at ON and that “ID NUMBER” is at ALL
according to the user’s menu.
The wireless remote control is not
effective.
The LED connector or the LED PWB is fault.
The PW connector or the
PWR PWB is fault.
The MAIN PWB is fault.
When the RS connector is disconnected,
is there a 0Vdc output at Pin 12 of the RS
connector in the MAIN PWB?
8-16
Summary of Contents for Elite PureVision PRO 1410HD
