Pioneer Elite PureVision PRO 1410HD Service Manual Download Page 33

Page: 33 / 132

• Problems in the power supply, such as “Failure in Power ON” or “LED flashing or lighting (alarm

display)”

→

1. Go to Power failure (P

-2).

• Problems in the images, such as “No pictures available”

→

2. Go to Image errors (P

-8).

• No video loop-out signal is generated.

→

The MAIN PWB is faulty.

• “Remote control not effective”

→

3. Go to Audio errors (P

-1

• “Remote control not effective”

→

4. Go to Remote control not effective (P

-1

• The closed caption is displayed incorrectly. (PX-*****A only)

→

5. Go to "The closed caption (CC) is displayed incorrectly." (P

-1

8-1

TROUBLESHOOTING

Summary of Contents for Elite PureVision PRO 1410HD





































































































































Search results

Summary of Contents for Elite PureVision PRO 1410HD

Reviews:

Related manuals for Elite PureVision PRO 1410HD

Brands by name

Popular brands

Pioneer Elite PureVision PRO 1410HD, Service Manual

Search results

Summary of Contents for Elite PureVision PRO 1410HD

Reviews:

Related manuals for Elite PureVision PRO 1410HD

Brands by name

Popular brands