manualshive.com logo in svg

Pioneer DRM-5004X, User Manual

Product Informatie: The Pioneer DRM-5004X is a cutting-edge audio receiver designed for optimal sound quality. With its advanced features and user-friendly interface, this manual provides step-by-step instructions for seamless operation. Download the free user manual from manualshive.com and unlock the full potential of your audio system.

Share
Download
background image

2

Pioneer DRM-5004X CD-ROM Jukebox User’s Guide

TP #120 v .1.0  2/95

2 - 3

2.1.2 Front and Rear Panel Features

The front and rear panels are described in detail below.  The internal
features and elements are also described in detail.

 

A. Front View

The front of the unit is a door that opens to allow access to the internal
elements of the unit such as the disc magazine, disc transporter and the
drive bays containing the drive units.  The front of the unit also features
a locking capability and a window for viewing indicator lights.

See 

Figure 2-1

, Front View of the DRM-5004X CD-ROM Jukebox:

1. Display 

- The window allows the LED display to be seen.  

2. Door

- The door opens to allow access to internal elements.

3. Casters

- Casters allow the DRM-5004X to be moved by rolling

the jukebox.  Casters lock to prevent the jukebox from rolling or
being shifted. Also, see 

Figure 2-2

, Locking and Unlocking

Casters.

4. Power Indicato

r

- The power indicator lights up when the power

to the DRM-5004X is turned on.

5. Padlock 

Installation

- The DRM-5004X accommodates a padlock

to secure the changer. Also, see 

Figure 2-3

, Padlock Installation.

6.

Keyhole

- The keyhole provides a locking mechanism for the

front door of the changer.

Features

Summary of Contents for DRM-5004X

















































































































































































































Reviews:

No comments

Related manuals for DRM-5004X

Octave TouchTunes Replacing preview
TouchTunes
Brand: Octave Pages: 22

Brands by name

Popular brands

Load more brands