Pioneer DRM-5004X, User Manual

Page: 142 / 208

5
Pioneer DRM-5004X CD-ROM Jukebox User’s Guide TP #120 v .1.0 2/95 5 - 15
From the Display that reads 40_ 401
1. Press SM+ to enter submode 1 (swing arm). See 5-14, A .
2. Press S1 to move the swing arm to the left.
3. Press SM+ again to enter submode 2 (slide). See 5-14, B .
4. Press S1 to extend the slide
5. Press SM+ again to enter submode 3 (chuck). See 5-14, C .
6. Press S1 to grasp the disc
7. Press SM- to enter submode 2 (slide). See 5-14, D .
8. Press S2 to retract the slide
9. Press SM- to enter submode 1 (swing arm). See 5-14, E .
10. Press S2 to center the swing arm
NOTE: The swing arm must be centered before the disc trans-
porter can be moved.
11. Press SM- to enter submode 0 (disc transporter). See 5-14, F .
12. Instruct disc transporter to take the disc to address 514,
the
drive in the upper right drive bay: Press S1 five times, Press
S2 one time, Press S3 4 times to indicate the address for the
upper right drive, drive 2.) See
5-14, G.
13. Press SM+ once to enter submode 1 (swing arm). See 5-14, H .
14. Press S3 to move the swing arm to the right.
15. Press SM+ again to enter submode 2 (slide). See 5-14, I .
16. Press S1 to extend the slide
17. Press SM+ again to enter submode 3 (chuck). See 5-14, J .
18. Press S2 to open the chuck and drop disc into drive 2
19. Press SM- to enter submode 2 (slide). See 5-14, K .
20. Press S2 to retract the slide
21. Press SM- to enter submode 1 (swing arm). See 5-14, L .
22. Press S2 to center the swing arm
23. Press SM+ 3 times for submode 4 (clamper). See 5-14,M .
24. Press S3
to clamp disc into upper right drive.
25. The disc is then in the drive. The drive can then receive SCSI
commands instructing it to read the disc.
Test Mode
✔