Pioneer CNDV-50MT, Operation Manual

Page: 20 / 142

18
Ch
ap
te
r
1
Ba
sic
Op
er
at
ion
NA
V
I/
A
V
Memory navi mode
While the map disc is inserted, you can store the
data on the map disc into the memory of the
navigation unit. If the map disc is removed from
the navigation unit after the data is stored,
navigation is performed using the data in the
memory (memory navi mode). In the memory navi
mode, you can play a music CD or DVD-Video on
the navigation unit while navigation is taking
place. The operation is automatically switched to
the memory navi mode when the map disc is
removed from the navigation unit.
Navigation in the memory navi mode
During the memory navi mode, navigation is
performed only using the data read into the
memory. Therefore, some functions are restricted
compared with navigation using the map disc
(DVD navi mode). These functions buttons, which
cannot be used in the memory navi mode, are
indicated in light grey. (For details, see page 20.)
If you want to use these functions, please insert
the map disc again. In addition, you may need to
insert the map disc and store new data in the
memory during navigation operation, such as
when the destination is far away. The memory
navi mode uses the following map data to
perform navigation.
Memory navi indicator
When new route guidance starts, the route data
from the map disc is read into the memory of the
navigation unit. The status of the memory navi
mode is indicated by the following icons on the
lower right of the map screen.
(green flashes): Reading the data
(green is lit): Operated in memory navi mode
(red is lit): Operated in memory navi mode,
but the distance for guidance is 20 km or less.
❒
Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the map disc.
When disappears, memory navi mode is
ready. You can now remove the map disc and use
the memory navi mode function.
How to listen to a CD
You can listen to a CD by removing the map disc
from the navigation unit.
➲
About Memory Navigation
➞
“Memory navi
mode” on page 18. (For details, see page 109.)
1
Press the EJECT button to remove the
map disc.
2
Insert the CD to the disc loading slot.
• Be sure to carefully insert the disc
horizontally into the disc loading slot.
When the disc is inserted halfway, the
DVD drive will begin loading
automatically.
• Do not forcibly insert the disc on an angle,
as this indicates that disc is not entering
the disc loading slot and may be damaged.
MAN-CNDV-50MT-EN.book Page 18 Wednesday, May 4, 2005 1:49 PM