Pioneer CNDV-50MT Operation Manual Download Page 110

Page: 110 / 142

108

App

When the installation is complete, the
opening display appears.

Press the NAVI/AV button to change the
navigation screen.

Some time is needed until navigation is ready.

Check the details of the cautionary
message and touch “OK”.

To set the time difference, touch “+” or
“–”.

The time difference between the time
originally set in this unit (Central European
Time) and the current location of your vehicle
is shown. If necessary, adjust the time
difference. Touching “

” or “

–

” changes the

time difference display in one-hour
increments. The time difference can be set
from +3 to –3 hours.

If necessary, set to summer time.

Summer time is off by default. Touch
“

Summer Time

” to change the time if

summer time is in effect. This turns the
display below Summer Time “

”.

To complete the setting, touch “Back”.

The map of your surroundings appears.

This completes the setup of your Navigation
System. Chapter 1 explains the basic operation of
your Navigation System.

➲

To change the time later

➞

Page 59

Time difference

MAN-CNDV-50MT-EN.book Page 108 Wednesday, May 4, 2005 1:49 PM

Summary of Contents for CNDV-50MT















































































































































Search results

Summary of Contents for CNDV-50MT

Reviews:

Related manuals for CNDV-50MT

Brands by name

Popular brands

Pioneer CNDV-50MT, Operation Manual

Search results

Summary of Contents for CNDV-50MT

Reviews:

Related manuals for CNDV-50MT

Brands by name

Popular brands