p
If data related to map data, such as custo-
mised POI data, is stored on the SD mem-
ory card, the navigation system restarts.
p
When you eject the SD memory card by
touching [
Eject SD
], the model information
that you are using will be automatically
stored into the SD memory card.
The utility programme navgate FEEDS will
use this information to recognise the model
that you use.
Plugging and unplugging a
USB storage device
CAUTION
!
To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!
If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Plugging in a USB storage device
%
Plug a USB storage device into the USB
connector.
USB connector
USB storage device
p
Compatibility with all USB storage devices
is not guaranteed.
This navigation system may not achieve op-
timum performance with some USB sto-
rage devices.
p
Connection via a USB hub is not possible.
Unplugging a USB storage device
%
Pull out the USB storage device after
checking that no data is being accessed.
Connecting and
disconnecting an iPod
CAUTION
!
To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
!
If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.
Connecting your iPod
Using the USB interface cable for iPod en-
ables you to connect your iPod to the naviga-
tion system.
p
A USB interface cable for iPod (CD-IU50V)
(sold separately) is required for connection.
1
Pull out the USB storage device after
checking that no data is being accessed.
USB and mini-jack
connector
USB interface cable
for iPod
Engb
15
Chapter
02
Basic
operation
Basic operation
