67
iTunes tagging
Error-8D
A
Built-in FLASH ROM encountered an error.
— Turn the ignition switch to OFF and then to ON.
Tag store failed.
A
Tag information cannot be stored in this product.
— Try again.
Already stored.
A
This tag information is already stored in memory.
— Tag information can only be saved once for any given
song. Tag information cannot be saved for the same song
more than once.
Memory full. Connect iPod.
A
The tag information is successfully stored. The flash memory
of this product has become full.
— The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
Memory full. Tags not stored. Connect iPod.
A
This product’s flash memory used as the temporary storage
area is full.
— The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
iPod full. Tags not transferred.
A
Memory used for tag information on the iPod is full.
— Synchronize the iPod with iTunes and clean up the tagged
playlist.
Tag transfer failed. Reconnect your iPod.
A
This product’s tag information cannot transfer to the iPod.
— Check the iPod and try again.
Apple CarPlay
Attempting to connect to Apple CarPlay.
A
Communication failed and the system is trying to connect.
A
Wait for a while. Then, perform the actions below if the error
message is still displayed.
— Restart the iPhone.
— Disconnect the cable from the iPhone, and then connect
the iPhone again after a few seconds.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
Bluetooth
Error-10
A
The power failed for the Bluetooth module of this product.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
Android Auto
Android Auto has stopped.
A
The connected device is not compatible with
Android Auto
.
— Check if the device is compatible with
Android Auto
.
A
The startup of
Android Auto
failed for some reasons.
— Disconnect the cable from the smartphone, and then
connect the smartphone again after a few seconds.
— Restart the smartphone.
— Turn the ignition switch to OFF and then to ON.
If the error message is still displayed after performing the
above action, please contact your dealer or an authorised
Pioneer Service Station.
A
The time set in this product is not correct.
— Check if GPS signals are received and the time is correctly
set.
Bluetooth pairing failed. Please pair your Android phone
manually.
A
The Bluetooth pairing failed for some reasons.
— Pair this product with the device manually.
Android Auto cannot connect right now. When safe to do
so, please check your Android phone.
A
The default settings are displayed on the screen of the
Android Auto-compatible device or images are not output
from the Android Auto-compatible device.
— Park your vehicle in a safe place, and follow the instruc-
tions displayed on the screen. If the error message is
still displayed after performing a on-screen instructions,
please reconnect the device.
Vehicle Adaptor
Communication error occurred.
A
The vehicle adaptor connection is incorrect.
— Check the connection and battery voltage for the vehicle
adaptor. If the error message is still displayed even after
you do not find any problems with the connection or bat-
tery voltage, please contact your dealer or an authorized
Pioneer Service Station.
Positioning technology
Positioning by GPS
The Global Positioning System (GPS) uses a network of satellites
orbiting the Earth. Each of the satellites, which orbit at a height
of 68 900 000 feet (21 000 km), continually broadcasts radio
signals giving time and position information. This ensures that
signals from at least three can be picked up from any open area
on the earth’s surface.
The accuracy of the GPS information depends on how good the
reception is. When the signals are strong and reception is good,
GPS can determine latitude, longitude and altitude for accurate
positioning in three dimensions. But if signal quality is poor, only
two dimensions, latitude and longitude, can be obtained and
positioning errors are somewhat greater.
Positioning by dead reckoning
The built-in sensor in the navigation system also calculates your
position. The current location is measured by detecting driving
distance with the speed pulse, the turning direction with the gyro
sensor and inclination of the road with the G sensor.
The built-in sensor can even calculate changes of altitude, and
correct the discrepancies in the distance travelled caused by
driving along winding roads or up slopes.
If you use this navigation system with connecting the speed
pulse, the system will become more accurate than no connec-
tion of speed pulse. So you connect the speed pulse without fail
to get the accuracy of positioning.
p
The position of the speed detection circuit vary depending
on the vehicle model. For details, consult your authorised
Pioneer dealer or an installation professional.
< CRB4880-A >
Appendix
