64
Restoring the default settings
CAUTION
Do not turn off the engine while restoring the settings.
p
This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
1 Display the “
System
” setting screen.
Refer to
Displaying the “
System
” setting screen
on page
2 Touch [
AV Source Settings
].
3 Touch [
Restore Settings
].
A message confirming whether to initialise the settings appears.
4 Touch the item you want to initialise.
All Settings
Almost all settings or recorded content returns to the
default.
Audio Settings
p
This setting is available when the source is turned off.
Theme Settings
Bluetooth Settings
5 Touch [
Restore
].
Troubleshooting
If you have problems operating this product, refer to this section.
The most common problems are listed below, along with likely
causes and solutions. If a solution to your problem cannot
be found here, contact your dealer or the nearest authorised
Pioneer service facility.
Common problems
A black screen is displayed, and operation is not possible
using the touch panel keys.
A
“
Power OFF
” mode is on.
— Press any button on this product to release the mode.
Problems with the AV screen
CD or DVD playback is not possible.
A
The disc is inserted upside down.
— Insert the disc with the label upward.
A
The disc is dirty.
— Clean the disc.
A
The disc is cracked or otherwise damaged.
— Insert a normal, round disc.
A
The files on the disc are in an irregular file format.
— Check the file format.
A
The disc format cannot be played back.
— Replace the disc.
A
The loaded disc is a type the DVD player cannot play.
— Check what type of disc it is.
The screen is covered by a caution message and the video
cannot be shown.
A
The handbrake lead is not connected or the handbrake is not
applied.
— Connect the handbrake lead correctly, and apply the
handbrake.
A
The handbrake interlock is activated.
— Park your vehicle in a safe place and apply the handbrake.
No video output from the connected equipment.
A
The “
AUX Input
” setting is incorrect.
— Correct the settings.
The audio or video skips.
A
This product is not firmly secured.
— Secure this product firmly.
No sounds are produced. The volume level will not rise.
A
Cables are not connected correctly.
— Connect the cables correctly.
A
The system is performing still, slow motion, or frame-by-
frame playback with DVD-Video.
— There is no sound during still, slow motion, or frame-by-
frame playback with DVD-Video.
A
The system is paused or performing fast reverse or forwards
during the disc playback.
— For the media other than music CD (CD-DA), there is no
sound on fast reverse or forwards.
The icon
is displayed, and operation is impossible.
A
The operation is not compatible with the video configuration.
— The operation is not possible. (For example, the DVD
playing does not feature that angle, audio system, subtitle
language, etc.)
The picture stops (pauses) and this product cannot be
operated.
A
The reading of data is impossible during disc playback.
— Stop playback once, then restart.
The picture is stretched, with an incorrect aspect ratio.
A
The aspect setting is incorrect for the display.
— Select the appropriate setting for that image.
A parental lock message is displayed and DVD playback
is not possible.
A
The parental lock is on.
— Turn the parental lock off or change the level.
The parental lock for DVD playback cannot be cancelled.
A
The code number is incorrect.
— Input the correct code number.
The DVD video is not played back with the audio/subtitle
language specified in “
DVD/DivX Setup
”.
A
The DVD does not support the language selected in “
DVD/
DivX Setup
”.
— Playback in the selected language is not possible if the
language selected in “
DVD/DivX Setup
” is not recorded
on the disc.
The picture is extremely unclear/distorted and dark during
playback.
A
The disc features a signal to prohibit copying. (Some discs
may have this.)
— Since this product is compatible with the copy guard
analogue copy protect system, the picture may suffer from
horizontal stripes or other imperfections when a disc with
that kind of protection signal is viewed on some displays.
This is not a malfunction.
Appendix
< CRB4880-A >
Other functions
Appendix
