Pioneer avh-4200nex, Owner'S Manual

Page: 45 / 244

45
Displaying the setting screen
for iDatalink
p
Functions and displays vary depending on the connected
type of iDatalink adapter and the vehicle model.
1 Display the “ System ” setting screen.
2 Touch [
OEM Settings
].
Displaying the “System” set-
ting screen
1 Press the button.
2 Touch , and then
.
Setting Bluetooth audio source
activation
The default setting is “ On ”.
1 Display the “ System ” setting screen.

Refer to Displaying the “ System ” setting screen on page
45
2 Touch [ AV Source Settings ].
3 Touch [ Bluetooth Audio ] to switch “ On ” or
“ Off ”.
Setting the ever scroll
When “ Ever Scroll ” is set to “ On ”, the recorded text information
scrolls continuously in the display while the vehicle is stopped.
The default setting is “ Off ”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
45
2 Touch [ Ever Scroll ] to switch “ On ” or “ Off ”.
Setting the beep tone
The default setting is “ On ”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
45
2 Touch [ Beep Tone ] to switch “ On ” or “ Off ”.
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC8) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
Camera View
mode also allows you to check what is behind you
while driving.
Camera for Camera View mode
Camera View can be displayed at all times. Please note that
with this setting, the camera image is not resized to fit, and that
a portion of what is seen by the camera is not viewable.
To display the camera image, touch [ Camera View ] on the AV
source selection screen.
 Refer to Source on the AV source selection screen on page
12
p
To set the rear view camera as the camera for Camera View
mode, set “ Back Camera Input ” to “ On ”.
p
When using the 2nd camera, set “ AV Input ” to “ Camera ”.
CAUTION
Check to make sure settings for rear view camera displays a
mirror reversed image.
p
Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p
When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in “ Reverse Gear Setting ”.
p
If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
p
When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.
Setting rear view camera activation
The default setting is “ Off ”.
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
45
2 Touch [
Camera settings
].
3 Touch [
Back Camera Input
] to switch “
On
” or
“
Off
”.
Setting the polarity of the rear view
camera
The default setting is “ Battery ”.
System settings
Vehicle Information screen
Climate screen
Parking Assist screen
45 < CRD4943-A >
iDatalink iDatalink System settings